Two historic district commissions
Milford’s Historic District Commission covers District 1; a separate commission reviews Historic District No. 2, South of the Green.
Local details
Wood stove installation in Milford, Connecticut
New Haven County / Connecticut shoreline. Heat your home, even when the power goes out: the permit, the local rules, and who installs here.
Free to request · No obligation to hireBefore you install in Milford.
Contractor calls in inspections
Milford’s inspection sheet says inspections need 24 hours’ notice and the general contractor must call in all inspections for sub-contractors.
Local detailsA stove shop in the city
Total Chimney Care runs a showroom at 116-P Research Drive in Milford and lists wood-burning stoves and inserts.
Local detailsThe coldest month here, January, has a 1991–2020 normal of 31.4°F at the BRIDGEPORT SIKORSKY MEM AP, CT station. One station is a planning reference, not a reading for every address. NOAA station normals
Local businesses to contact directly
Wood stove installers in Milford.
Compare installation providers and nearby showrooms. Check service coverage and assessment fees directly, or request help finding an installer.
- I
Fireplace Depot
Sales & installation · Seymour store at 682 South Main St; stoves page names Milford among towns servedIts stoves page says it sells, installs and services coal, wood, gas and pellet stoves, with brands including Regency and Hearthstone, and lists professional installation and venting. Milford is on its list of Connecticut towns served. It is based inland in Seymour, so confirm travel and who files the Milford permit online.
View business & contact detailsWebsite reviewed Sep 29, 2026 · Not contacted by FireplaceLab - II
Luxury Fire
Retailer & showroom · Hamden showroom at 3876 Whitney Ave; Connecticut page names MilfordIts Connecticut page describes a Hamden showroom with wood inserts and wood-burning fireplaces and names Milford among towns served. The same page says sales and installations run nationwide through a certified dealer network, so ask whether its own crew or a dealer would install in Milford, and who holds the permit.
View business & contact detailsWebsite reviewed Sep 29, 2026 · Not contacted by FireplaceLab - III
Rich & John’s Complete Chimney Service
Sales & installation · Woodbury showroom at 787 Main Street; New Haven County list names MilfordIts store page lists wood stoves and inserts and says staff will help choose a model and professionally install it. Milford appears on its New Haven County service list. The showroom is in Woodbury, well inland, so ask about travel and whether chimney relining is in the quote.
View business & contact detailsWebsite reviewed Sep 29, 2026 · Not contacted by FireplaceLab - IV
Total Chimney Care
Chimney service & installation · Milford showroom at 116-P Research Drive; Milford service-area pageIts fireplace store page lists wood-burning stoves and wood-burning inserts and says the company has installed hundreds if not thousands of such units; its showroom is in Milford and it has a Milford service page. Ask whether it will call in inspections as general contractor and whether a liner is included.
View business & contact detailsMilford service areaWebsite reviewed Sep 29, 2026 · Not contacted by FireplaceLab
Unpaid listings, shown alphabetically. Website research is not contractor vetting or confirmation of a partnership. Confirm qualifications and insurance before hiring.
Details your installer can help confirm
Wood stove permits in Milford.
Apply to Building Inspection on West River Street.
Inside Milford, permits come from the Building Inspection Division of the Department of Permitting and Land Use at 70 West River Street (203-783-3234). Building permits and sub-permits, including mechanical permits, are applied for through the city’s online permitting center. The division’s fee schedule, effective January 6, 2020, charges one- and two-family alterations $20 for the first $1,000 of declared value and $15 per $1,000 after that, with heating, ventilation and exhaust work included. No page names wood stoves, so ask which permits cover the stove, liner or chimney. Orange, Stratford and West Haven have their own building officials.
Milford Building InspectionTwo districts, two commissions, two processes.
Milford has a Historic District Commission for District 1, which meets on the second Tuesday of each month, and a separate commission for Historic District No. 2, South of the Green, which meets on the second Wednesday. District 1’s certificate application carries a $75 fee and says occupancy and use before a certificate is issued is prohibited. If a stove adds a chimney, cap or wall vent near the Green, find out which district, if either, covers your address first.
Milford Historic District CommissionSouth of the Green: ask first, then notify neighbours.
The District No. 2 procedure memo says its commission reviews alterations visible from a public street. Owners should contact a commissioner before scheduling work; if no certificate is needed, the owner gets a letter saying so. Otherwise the application, with a $100 fee and eight copies, is due at least 14 days before the monthly meeting, and the owner must mail notice to property owners within 200 feet in the district.
Milford Historic District No. 2: COA procedure memo (PDF)Inspections: 24 hours’ notice, contractor calls.
Milford’s inspection requirements sheet says inspections must be called in at least 24 hours ahead, scheduling is at the Building Division’s discretion, and the general contractor must call in all inspections for sub-contractors, with permit numbers, address and scope ready. It adds that no walls may be enclosed or insulation installed until rough heating and framing inspections pass. Schedule those before finishing around a new chimney chase.
Milford inspection requirements (PDF)Fees follow declared job value.
Milford’s Building Permit Fee Schedule, effective January 6, 2020, charges one- and two-family additions, alterations and repairs $20 for the first $1,000 or portion and $15 for each further $1,000, including electrical, heating, ventilation and exhaust work, and the state education fee. A certificate of occupancy or approval is $20. The value is as declared by the applicant and accepted by the building official, so make sure the quote’s value and the permit match.
Milford Building Permit Fee Schedule (PDF)This is a planning guide, not a permit determination. The local authority and your installer must confirm current requirements for your property and appliance. We have not verified project-specific approvals or fees.
Choose the right project
Wood stoves and fireplace inserts in Milford.
INew stove or replacement
Install a wood-burning stove.
An enclosed stove with a chimney system designed for your home. An installer assesses placement, venting, and the space you want to heat.
About wood stoves
IIExisting fireplace
Explore a fireplace insert.
Use a suitable existing fireplace as the starting point. Have the opening, chimney, and liner assessed for the proposed insert.
About insertsCan you install a wood stove without a chimney?
A new wood stove can sometimes be installed with a new chimney system. Ask a Milford-area provider to assess a suitable route and quote the complete job. Installation without an existing chimney
Want heat during a power outage?
Many cordwood stoves provide heat without electricity. Ask about your exact model, any powered blower, and the rooms it can heat. Read the power-outage heating guide
Room photographs illustrate project starting points; they are not installations completed through FireplaceLab.
Wood stove installation costs in Milford.
U.S. planning ranges to prepare for a Milford quote. They are national estimates, not measured Milford averages or offers from listed businesses.
Freestanding wood stove$2,500–$7,500
Wood-burning insert$3,000–$8,000+
New installation, no chimney$5,500–$9,000+
Unit and typical installation ranges from HomeGuide’s national cost guide, reviewed Sep 28, 2026. These are alternative project scenarios, not amounts to add together. Repairs, access, venting, permits, and premium models can move costs higher.
What to ask a Milford installer.
- Will you apply through Milford’s online permitting center, and under which permit does the stove and liner go?
- As general contractor, will you call in the rough and final inspections with 24 hours’ notice?
- Is the house in Historic District 1 or South of the Green, and will the flue or cap be visible from the street?
Compare quotes on the same scope.
Request separate details for the appliance, chimney or liner, hearth work, labor, removal, permits, inspections, and exclusions. Confirm any paid assessment before booking.
Will you save on heating?
There is no reliable single savings figure for every Milford home. Compare your current heating cost with delivered dry wood, appliance efficiency, how much heat you will replace, maintenance, and the upfront installation. Backup comfort and financial payback are separate decisions. Compare all heating options
Milford wood stove installation FAQs.
Do I need a permit for a wood stove in Milford?
Milford’s Building Inspection Division issues building and mechanical sub-permits through its online permitting center, and the Connecticut State Building Code applies to alterations. The city’s pages don’t name wood stoves, so call 203-783-3234 to ask which permits apply to your stove, connector and chimney liner before you order equipment.
My house is near the Milford Green. Does a stove need historic approval?
It may. Milford has two local districts with separate commissions. District No. 2, South of the Green, reviews alterations visible from a public street and suggests contacting a commissioner first; if no certificate is needed, you get a letter. District 1 uses a $75 application. An insert in an existing chimney may raise fewer questions than a new flue.
What does the permit cost in Milford?
The fee schedule effective January 2020 charges one- and two-family alterations $20 for the first $1,000 of declared value and $15 for each further $1,000, covering heating and exhaust work, plus a $20 certificate of approval. The building official must accept the declared value, so confirm the total with Building Inspection.
What FireplaceLab does
Explore your options. Then get a quote for your home.
- I
Answer two simple questions
Tell us what’s there now and what you want from wood heat. No contact details needed.
- II
See options and rough costs
Explore a suitable starting point and national installed cost ranges.
- III
Request a local quote
When you’re ready, share your home details. We’ll look for an installer to assess the job and quote the work.
FireplaceLab is an installer-matching service. Your installer handles the assessment, quote, and installation. A request does not book work or guarantee a match.
Get a plan and a price for your home.
Tell us where you live and what you want to install. We’ll look for a local professional to assess the work.
Explore options & pricing